Factory direct pricing on metal roofing systems, clay tile, and slate

Cutting & Bending Tools


Left Offset Aviation Snip – MWT-6510L

MIDWEST® Offset Left Aviation Snips flow material away from blades and position user’s hand above material for best maneuverability cutting full sheets or tight curves.  This model is easiest used in right hand.

Cuts straight and tight left curves. Easiest used in right hand. Bottom blade serrated.

Left18ga CR STEEL22ga STAINLESS


Right Offset Aviation Snip – MWT-6510R

MIDWEST® Offset Right Aviation Snips flow material away from blades and position user’s hand above material for best maneuverability cutting full sheets or tight curves.  This model is easiest used in left hand.

Cuts straight and tight right curves. Easiest used in left hand. Bottom blade serrated.

Right18ga CR STEEL22ga STAINLESS


MT14010 Fairmont Tongs

MT14010 Fairmont Tongs

  • Fairmont tongs, offset handles
  • Forged and plated tongs have bending depth marks on jaws
  • 9-1/2″ length
  • 3″ wide jaw

Made in USA


High Leverage Drip Edge Folding Tools

 
Made In USA

Big 24-inch (61 cm) and compact 18-inch (46 cm) Drip Edge Folding Tools make quick bends along the drip edge of flat-pan standing seam metal roofing panels. Two rib-reinforced steel plates are permanently welded together to create two folding seams for making 1-inch (25.4 mm) and 1-1/2-inch (38.1 mm) deep bends in maximum 22-gauge (0.76 mm) steel.  A two-post-design, fiberglass reinforced nylon handle offers durable, lightweight strength and high leverage for working overhead or on a bench.


3-Station Edge Roller

 
Made In USA

The ER3 3-Station Edge Roller assures a uniform bend along the entire length of material. The tool quickly adjusts for making 5/8” to 4” (15.9-102 mm) bends in 29-22 gauge (0.36-0.76 mm) steel. The center roller station of the ER3 Edge Roller features a precision English/Metric depth gauge on one shaft leg that, when locked in place at desired setting, accurately aligns the depth of all roller stations. Large, comfortable adjustment knobs hold depth setting securely.

Malco’s ER3 also adjusts for making curved bends! The center roller station of the ER3 is also independently adjustable, with outer roller stations retracted and locked, to allow for bending on a curve.